t-mass T 150是第一個Endress+Hauser用于液體測量的熱式質量流量計，t-mass T 150主要應用在水中的測量，當流量計獨立的測量一種液體的電導率時，也可以用在各種導電性和非導電性液體的監測和趨勢監測。用戶特定的實質可以保存在顯示器，也可以通過顯示器從一臺設備傳遞到另一臺設備。
專用于監測導電性和非導電性的液體
高過程安全性：內置溫度補償，高重復性和線性度
經濟型測量：安裝簡便，壓損可以忽略不計，免維護
可靠流量趨勢：多變量測量
快速有效調試：引導式操作菜單
高工廠適應性：自診斷和錯誤監測
自動數據恢復，便于維護
該測量原理具有高可操作測量范圍，能直接測量質量流量
專業測量導電和非導電液體流量
儀表特性
插入型適用于公稱管徑為 DN 40 ~ 1000 (1 1/2 ~ 40")的管道
標準型傳感器或衛生型傳感器
耐SIP清洗，溫度可達130 °C (266 °F)
一體化型帶 DC 24 V 電源供電
4-20 mA HART, 脈沖/頻率/開關量輸出
緊湊和堅固的變送器
測量原理
熱式
主要特點
The flowmeter for reliable and easy monitoring of liquids. Dedicated to the monitoring of conductive and non‐conductive liquids.
特點
High process safety – high repeatability and linearity due to integrated temperature compensation. Cost‐effective measurement – easy installation, negligible pressure loss and maintenance‐free. Reliable flow trending – multivariable measurement. Insertion version for nominal diameter DN 40 to 1000 (1½ to 40"). Sensor in standard or hygienic version.
Transmitter features
Fast and efficient commissioning – guided operating menus. High plant availability – self‐diagnostics and error monitoring. Automatic recovery of data for servicing. Device in compact version with DC 24 V power supply. 4‐20 mA HART, pulse/frequency/switch output.
直徑
DN 40 to 1000 (1½ to 40")
Wetted materials
Transducer: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022)
Insertion tube: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022)
Connection:
‐ Compression fitting: 1.4404 (316L); Alloy C22, 2.4602 (UNS N06022)
‐ Threadolet: 1.4404 (316L); Alloy C22, 2.4602 (UNS N06022)
‐ Clamping ferrule: PEEK 450G; 1.4404 (316L); Alloy C22, 2.4602 (UNS N06022)
‐ Tri‐Clamp; DN40 DIN 11851, DN50 DIN 11851; DN40 DIN 11864‐1A, DN50 DIN 11864‐1A: 1.4404 (316L)
Measured variables
Mass flow, temperature, volume flow
測量誤差
Flow: ±5 % o.f.s.
量程
226 to 14 100 000 l/h (60 to 3 730 000 gal/h)
(under reference conditions)
壓力范圍
PN 40
過程溫度
–20 to +100 °C (–4 to +212 °F)
環境溫度
–40 to +60 °C (–40 to +140 °F)
Transmitter housing material
AlSi10Mg, coated
電子插件的防護
IP66/67, type 4X enclosure
顯示/操作
4‐line display with push buttons
Configuration via local display and operating tools possible
輸出
4‐20 mA HART (active)
Pulse/frequency/switch output (passive)
輸入
Status b
通信
HART
Power supply
DC 18 to 30 V
防爆認證
ATEX, IECEx, cCSAus
Other approvals and certificates
Metrological approvals and certificates
Calibration perbed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR
Pressure approvals and certificates
CRN
Material certificates
3.1 material
Hygienic approvals and certificates
Sanitary approval: 3-A, EHEDG
