該流量計帶一體化變送器，節約成本。
Promass E系列質量流量計采用科氏力原理，節約成本，贏得了良好的聲譽。該流量計帶一體化Promass 40變送器，適用于低端測量場合，提供高精度的液體與氣體流量測量，應用范圍廣泛。
模塊化的設備與操作概念，帶來更高的效率。
一體化結構的流量測量，更少測量點－多元化測量（流量，溫度）
平衡的雙管測量系統設計，抗震性好。
堅固的設計，不受外部管道作用力影響。
無需進出口直管段，安裝簡便。
科氏力測量原理不受液體物理屬性影響，例如粘度和密度。
極為精確地測量液體和氣體，例如添加劑、石油、油脂、酸、堿、涂料、油漆和天然氣。
流體溫度最高可達 +140 °C (+284 °F)
過程壓力可以高達100 bar (1450 psi)
質量流量測量可達180 t/h (6600 lb/min)
危險領域認證
ATEX, FM, CSA, TIIS, IECEx, NEPSI
| 測量原理 | 科氏力 | |
| 主要特點 |
The flowmeter for minimized cost of ownership combined with a compact field transmitter. Highly accurate measurement of liquids and gases for a wide range of standard applications. |
|
| 主要特點 |
體積流量計 |
|
| 特點 |
低成本的機械儀表的理想替換儀表，帶數據記錄功能 |
|
| Transmitter features |
Cost-effective – dedicated design for low-end applications and direct integration. Safe operation – display provides easy readable process inbation. Fully industry compliant – IEC/EN/NAMUR. 2-line backlit display without local operation. Device in compact version. |
|
| 直徑 |
"DN 8...50，5/16"...2" |
|
| Wetted materials |
Measuring tube: 1.4539 (904L) Connection: 1.4404 (316/316L) |
|
| Measured variables |
Mass flow, volume flow, corrected volume flow |
|
| 測量誤差 |
質量流量：±1.0 % |
|
| 量程 |
0...70'000 kg |
|
| 壓力范圍 |
PN40...100，Cl 150...300，JIS 10...20K |
|
| 過程溫度 |
-40...+125℃ |
|
| 環境溫度 |
Standard: –20 to +60 °C (–4 to +140 °F) Option: –40 to +60 °C (–40 to +140 °F) |
|
| Sensor housing material |
1.4301 (304), corrosion resistant |
|
| Transmitter housing material |
Powder-coated die-cast aluminium |
|
| 電子插件的防護 |
IP 67 NEMA 4x |
|
| 顯示/操作 |
兩行背光顯示，通過HART或FieldTool操作 |
|
| 輸出 |
4...20 mA 脈沖/狀態 |
|
| 輸入 |
狀態 |
|
| 通信 |
HART |
|
| Power supply |
DC 16 to 62 V AC 85 to 260 V (45 to 65 Hz) AC 20 to 55 V (45 to 65 Hz) |
|
| 防爆認證 |
ATEX、FM、CSA |
|
| Other approvals and certificates |
3.1 material, calibration perbed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR, marine PED, CRN 3-A |
|
| Product safety |
CE, C-tick, EAC marking |
|
| Metrological approvals and certificates |
Calibration perbed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR |
|
| Marine approvals and certificates | Marine approval | |
