一體化型或分離型單管流量計，耐腐蝕。
Promass H系列單管流量計，耐腐蝕，可用于腐蝕性液體與氣體的精確測量。與帶按鍵操作的Promass 80變送器相配套使用，Promass 80H可為此類應用提供高性價比的解決方案。
模塊化的設備與操作概念，帶來更高的效率
數據備份，提升過程質量
一體化型多變量流量測量
平衡的單管測量系統設計，抗震性好
結構堅固，可有效保護設備不受管道應力的影響
無需進出口直管段，安裝簡便
科氏力流量測量原理與流體的物理性質無關，例如粘度和密度。
極為精確地測量液體，如石油、潤滑劑、液化氣、油漆、清潔劑和溶劑。
流體溫度最高可達 +200 °C (+392 °F)
過程壓力可以高達 40 bar (580 psi)
質量流量測量可達 70 t/h (2570 lb/min)
危險區域認證
ATEX, FM, CSA, TIIS
過程控制系統連接
HART, PROFIBUS PA
| 測量原理 | 科氏力 | |
| 主要特點 |
平衡單管測量系統，“Fit-and-Forget”安裝方式；易于清潔、衛生、抗化學腐蝕 |
|
| 特點 |
S-DAT，確認，快速設定，1個累加器 |
|
| Transmitter features |
Cost‐effective – dedicated design for standard applications. Safe operation – display provides easy readable process inbation. Fully industry compliant – IEC/EN/NAMUR. 2‐line backlit display with push buttons. Device in compact or remote version. |
|
| 直徑 |
"DN 8...50，5/16"...2" |
|
| Wetted materials |
Measuring tube: Tantalum 2.5W; 702 (UNS R60702) Connection: Tantalum; 702 (UNS R60702) |
|
| Measured variables |
Mass flow, density, temperature, volume flow, corrected volume flow, reference density |
|
| 測量誤差 |
質量流量：±0.2 %，體積流量：±0.5 % |
|
| 量程 |
0...70'000 kg/h |
|
| 壓力范圍 |
PN 40，Cl 150...300，JIS 10...20K |
|
| 過程溫度 |
-50...+200℃ |
|
| 環境溫度 |
Standard: –20 to +60 °C (–4 to +140 °F) Option: –40 to +60 °C (–40 to +140 °F) |
|
| Sensor housing material |
1.4301 (304), corrosion resistant |
|
| Transmitter housing material |
Powder‐coated die‐cast aluminium 1.4301 (304), sheet CF3M (316L), cast |
|
| 電子插件的防護 |
IP 67 NEMA 4x |
|
| 顯示/操作 |
兩行背光顯示，按鍵操作 |
|
| 輸出 |
4...20 mA 脈沖/頻率，狀態 |
|
| 輸入 |
狀態 |
|
| 通信 |
HART、PROFIBUS PA |
|
| Power supply |
DC 16 to 62 V AC 85 to 260 V (45 to 65 Hz) AC 20 to 55 V (45 to 65 Hz) |
|
| 防爆認證 |
ATEX、FM、CSA |
|
| Other approvals and certificates |
3.1 material, calibration perbed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR, SIL PED, CRN |
|
| Product safety |
CE, C-tick, EAC marking |
|
| Functional safety |
Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511 |
|
| Metrological approvals and certificates |
Calibration perbed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR |
|
| Pressure approvals and certificates |
PED, CRN |
|
| Material certificates | 3.1 material | |
