Integrated Water-cooled Screw Chiller
This integrated water-cooled screw chiller is an integrated industrial cooling unit containing chiller, water pump, water tank and control panel. The integrated water-cooled chiller is easy to install and easy to operate, greatly lowering installation cost.
Our integrated water-cooled screw chillers are available in over 10 models, giving customers a wide choice of cooling capacities from 143kW up to 805kW. Please bl us your requirements, our professional engineers are delighted to recommend appropriate industrial chiller to meet your specific application needs .
Heat-cold Types of Water Chillers System AC-10H
Specification
Model Item |
AC-10H |
|
nominal cooling capacity |
kcal/h |
25886 |
kw |
30.1 |
|
b power |
kw |
22.52 |
power supply |
3PH 380V 50HZ |
|
refrigerant |
type |
R22(R134A/R407C/R410A) |
type of control |
capillary |
|
compressor |
type |
hermetic scroll type |
power(kw) |
8.1 |
|
condenser |
type |
finned copper tube+low noise outer fan |
power(kw) |
0.92 |
|
cooling air flow(m3/h) |
10000 |
|
evaporator |
type |
shell and tube+water tank |
chilled fluid flow(m3/h) |
5.91 |
|
volume(L) |
200 |
|
inlet and outlet pipe diameter(inch) |
1-1/2 |
|
pump |
power(kw) |
1.5 |
lift(m) |
20 |
|
heating device |
type |
heating pipe |
power(kw) |
12 |
|
safety protection |
compressor overheating protection, over-current protection, high and low pressure,over-temperature protection, flow switch, protection,phase sequence or missing phase protection, exhaust overheating protection |
|
weight |
kg |
450 |
dimension |
mm |
1680*780*1630 |
Note: 1.Nominal cooling capacity is according to:
Inlet chilled fluid temperature: 17℃
Outlet chilled fluid temperature: 12℃
Inlet cooling air temperature: 30℃
Outlet cooling air temperature: 35℃
2. Working Range:
The temperature range of chilled fluid is from 5℃ to 35℃;
Temperature difference between inlet and outlet chilled fluid is from 3℃ to 8℃.
It is better to run the chiller while the ambient temperature at or below 35℃.
We reserve the right to modify the above dimensions or beters without further notice.