| 詳細參數 |
|---|
品牌：GE
結構形式：模塊式
安裝方式：控制室安裝
LD指令處理器：硬PLC
功能：PLC\/DCS模塊
工作電壓：電源組24VDC
產品認證：CE
環境溫度：-30至65°C
環境濕度：-40°C至 85°C
加工定制：否
重量：0.2kg
產地：美國
可售賣地：全國
型號：IS215VCMIH2CA
GE IS215VCMIH2CA IS200VCMIH2CAA
IS215VCMIH2CA IS200VCMIH2CAA?
規格：IS215VCMIH2CA IS200VCMIH2CAA?
所屬類型：其它設備
品牌：PLC/DCS模塊
產品詳情
規格：IS215VCMIH2CA IS200VCMIH2CAA?
新舊程度：全新
品牌：PLC/DCS模塊
用途：現在很多安全控制器可以與標準控制器混用，這種系統的主要好處是一個項目中安全與標準一起共用一個PLC平臺。安全控制器是整個控制系統的一部分，可以自動配置，不需要用戶干預。
特點：
（1）配置方便：可接控制系統的需要確定要使用哪家的PLC，那種類型的，用什么模塊，要多少模塊，確定后，到市場上定貨購買即可。
（2）安裝方便：IS215VCMIH2CA IS200VCMIH2CAA硬件安裝簡單，組裝容易。外部接線有接線器，接線簡單，而且一次接好后，更換模塊時，把接線器安裝到新模塊上即可，都不必再接線。內部什么線都不要接，只要作些必要的DIP開關設定或軟件設定，以及編制好用戶程序就可工作。離散工廠中有很多地方要用到運動控制，如印刷行業、輪胎行業、日用品行業等，因此很多工廠要求PLC能夠集成運動控制。支持運動控制的PLC廣泛用于各類機器的工作：在以太網上集成運動控制，支持驅動器直接連接以太網，運動控制器可用以太網執行多軸、同步運動控制應用；有些PLC還支持模擬輸入的伺服模塊控制驅動器/執行器。
?Convenient configuration: it can meet the needs of the control system, determine which PLC to use, which type, what module to use and how many modules to use. After confirmation, order and purchase in the market.
Easy installation: is215vcmih2ca is200vcmih2caa hardware installation is simple and easy to assemble. There is a connector for external wiring, which is simple. After one-time connection, when replacing the module, install the connector on the new module without wiring. Don't connect any internal wires, just make some necessary dip switch settings or software settings, and prepare user programs. Motion control is used in many places in discrete factories, such as printing industry, tire industry, commodity industry, etc. Therefore, many factories require PLC to integrate motion control. PLC supporting motion control is widely used in the work of various machines: it integrates motion control on Ethernet, supports the direct connection of drivers to Ethernet, and the motion controller can use Ethernet to perb multi axis and synchronous motion control applications; Some PLCs also support servo modules with analog bs to control drivers / actuators.
B 81007-465-51-R?
GE IC698PSA350D?
A-B 1785-ME64/A?
A-B 700-PKT/E?
ABB PFTL101A 0.5KN?
GE 323A2419P3?
A-B 1788-MCHKR/A?
TDK FAW05-5R0?
ABB 3HNA025019-001?
NI PXI-6052E?
PACIFIC LA23GCKC-1Y?
VEXTA PH266-01GK-C5?
ORIENTAL MOTOR 2GK180K?
MITSUBISHI A1SJ61QBT11?
