| 詳細參數 | |||
|---|---|---|---|
| 品牌 | KLA-Tencor | 型號 | 2214-30SLQTC |
| 結構形式 | 模塊式 | 安裝方式 | 控制室安裝 |
| LD指令處理器 | 硬PLC | 功能 | 激光器 |
| 工作電壓 | 電源組24VDC | 處理速度 | 133MHz |
| 程序容量 | 500M | 數據容量 | 4兆字節 |
| 產品認證 | CE | 環境溫度 | 0°Cto,60°C |
| 環境濕度 | 0到90%的相對濕度,無冷凝 | 加工定制 | 否 |
| 重量 | 6.76磅 | ||
KLA-Tencor 2214-30SLQTC 進口氬激光器備件
內部繼電器數，有的稱為標志位數，代表著PLC的內部繼電器數。2214-30SLQTC與I/O繼電器區相聯系著，有時與后者相聯系進行處理。內部繼電器多，便于PLC建立復雜的時序關系，以實現多種多樣的控制要求。一般講，內部繼電器數比I/O繼電器要多得多。
有的內部繼電器還可丟電保持，即它的狀態（ON或OFF）、PLC丟電后，靠內部電池仍予以保持。再上電后可繼續丟電前的狀態。保持繼電器可增強PLC控制能力，特別對記錄故障，故障排除后恢復運行，更顯得有用。定時器，可進行定時控制。定時值可任意設定。定時器有多少，設定范圍有多大，設定值的分辨率又是多少，這些都代表定時器件的性能。計數器，可進行計數，到達某設定計數值可發送相應信號?？蛇M行什么樣的計數，計數范圍多大，怎么設定，有多少計數器，則是PLC計數器性能的代表指標。
數據存儲區，用以存儲工作數據。2214-30SLQTC多以字、兩字或多字為單位予以使用，是PLC進行模擬量控制，或記錄數據所必不可少的。這個存儲區的大小代表PLC的性能也是越大越好。趨勢也是越來越大。小型機也如此。如日本OMRON公司的CQM1機，其DM區就有6k字。而過去同是小型機的C60P的DM區才64個字。大型機的DM可達10K以至幾十K。
The number of internal relays, some of which are called flag digits, represents the number of internal relays of 2214-30SLQTC. It is associated with the I / O Relay area and sometimes with the latter for processing. There are many internal relays, which is convenient for PLC to establish complex timing relationship to realize a variety of control requirements. Generally speaking, there are many more internal relays than I / O relays.
Some internal relays can also be maintained after power loss, that is, its state (on or off) and 2214-30SLQTC can still be maintained by internal battery after power loss. The state before power loss can be continued after power on. Holding relay can enhance PLC control ability, especially for recording faults and recovering operation after troubleshooting.Timer for timing control. The timing value can be set arbitrarily. The number of timers, the setting range and the resolution of the setting value all represent the perbance of the timing device.
