| 詳細參數 | |||
|---|---|---|---|
| 品牌 | PROSOFT | 型號 | 3150-MCM |
| 結構形式 | 模塊式 | 安裝方式 | 控制室安裝 |
| LD指令處理器 | 硬PLC | 功能 | 通信模塊 |
| 工作電壓 | 5VDC,5% | 輸出頻率 | 1100mA,最大值 |
| 處理速度 | 10Mbit/s,200Datasets/s | 產品認證 | UL |
| 環境溫度 | -40°C至85°C | 環境濕度 | 5%至95%（無冷凝） |
| 加工定制 | 否 | 重量 | 0.35磅 |
| 產地 | 美國 | 外形尺寸 | 5.75x5.25x1.25 |
PROSOFT 3150-MCM然后可以輸入所需的IP地址，也可以輸入最近使用的IP地址可以通過單擊最近使用的列表中的項目來選擇。
如果選中“啟用靜態”復選框，則IP地址將設置為靜態在IP分配之后，從而禁用未來的DHCP請求。一旦IP地址窗口被接受，DHCP服務器將自動將IP地址分配給模塊，然后讀取標識對象產品名稱從設備上。綠色指示設備成功分配IP地址關聯行的背景。除了設置IP地址外，還可以設置許多其他網絡參數在DHCP過程中設置。可以在中查看和編輯這些設置PLX50配置實用程序應用程序設置，在DHCP服務器選項卡中。DHCP過程完成后，可以使用設置網絡設置通過目標瀏覽器進行以太網端口配置?？梢栽凇肮ぞ摺辈藛蜗略L問目標瀏覽器。設備顯示在Project Explorer樹中，如下所示，其配置窗口打開?？梢酝ㄟ^(guò)雙擊以下任一方法重新打開“設備配置”窗口：項目瀏覽器樹中的模塊，或右鍵單擊該模塊并選擇配置.
Prosoft 3150-mcm# then you can enter the required IP address or the most recently used IP address, which can be selected by clicking the item in the most recently used list.
If the enable static check box is selected, the IP address will be set to static after IP assignment, disabling future DHCP requests. Once the IP address b is accepted, the DHCP server will automatically assign the IP address to the module, and then read the identification b product name from the device. Green indicates that the device successfully assigned the background of the associated line of IP address. In addition to setting the IP address, you can also set many other network beters, which are set during DHCP. You can view and edit these settings in the plx50 configuration utility application settings in the DHCP server tab. After the DHCP process is completed, you can configure the Ethernet port through the target browser using the network settings. You can access the target browser under the tools menu. The device is displayed in the Project Explorer tree, as shown below, and its configuration b opens. You can reopen the device configuration b by double clicking a module in the project browser tree, or right clicking the module and selecting configuration
